============ start debug info ============ libhd version 3.17 (ia32) kernel version is 2.4 ----- /proc/cmdline ----- auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz ----- /proc/cmdline end ----- debug = 0xff7ffff7 probe = 0x00e3effffedfffe6 (+memory +pci -pci.range -pci.ext +isapnp +cdrom +cdrom.info +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +ide +scsi -scsi.geo +scsi.cache +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +dac960 +smart +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys +dasd +i2o +cciss +bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum +manual +fb -max -lxrc) >> floppy.1: get nvram ----- /proc/nvram ----- Checksum status: valid # floppies : 1 Floppy 0 type : 3.5'' 1.44M Floppy 1 type : none HD 0 type : 01 HD 1 type : none HD type 48 data: 0/0/0 C/H/S, precomp 0, lz 0 HD type 49 data: 0/188/229 C/H/S, precomp 154, lz 58112 DOS base memory: 640 kB Extended memory: 65535 kB (configured), 65535 kB (tested) Gfx adapter : EGA, VGA, ... (with BIOS) FPU : installed ----- /proc/nvram end ----- >> floppy.2: create entry >> bios.1: cmdline >> bios.2: ram bios: 1 disks bios: EBDA 0x00400 bytes at 0x9fc00 >> bios.2: rom >> bios.3: smp ----- BIOS data 0x00400 - 0x004ff ----- 400 f8 03 00 00 00 00 00 00 78 03 00 00 00 00 c0 9f "........x......." 410 27 42 00 7f 02 00 00 20 00 00 30 00 30 00 62 30 "'B..... ..0.0.b0" 420 61 1e 6e 31 61 1e 6e 31 65 12 33 04 0d 1c 0d 1c "a.n1a.n1e.3....." 430 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 440 00 01 00 00 00 00 00 00 00 1d 80 00 00 18 00 00 "................" 450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 460 00 00 00 d4 03 29 30 d6 d1 00 90 00 92 d6 07 00 ".....)0........." 470 00 00 00 00 00 01 08 00 14 14 14 14 01 01 01 01 "................" 480 1e 00 3e 00 30 10 00 60 09 11 0b 00 50 00 00 07 "..>.0..`....P..." 490 07 07 00 00 00 00 10 12 00 00 00 00 00 00 00 00 "................" 4a0 00 00 00 00 00 00 00 00 60 35 00 c0 00 00 00 00 "........`5......" 4b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" ----- BIOS data end ----- ----- EBDA 0x9fc00 - 0x9ffff ----- 9fc00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fc90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fca0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fcb0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fcc0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fcd0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fce0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fcf0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fd90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fda0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fdb0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fdc0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fdd0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fde0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fdf0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fe90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fea0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9feb0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fec0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fed0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fee0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fef0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ff90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ffa0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ffb0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ffc0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ffd0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9ffe0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 9fff0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" ----- EBDA end ----- ----- BIOS ROM 0xc0000 - 0xfffff ----- c0000 55 aa 60 eb 04 37 34 30 30 e9 93 46 00 00 00 00 "U.`..7400..F...." c1000 98 e0 00 20 7c 02 57 57 00 39 20 00 00 00 01 40 "... |.WW.9 ....@" c2000 e8 17 00 fe c3 38 fb 76 f5 fe c9 eb e4 c3 50 52 ".....8.v......PR" c3000 19 80 fc 4b 74 14 26 ac 86 e0 3c 53 74 08 3c 33 "...Kt.&...> bios.4: vbe >> bios.4.1: vbe info >> bios.4.2: mode info version = 2.0, oem version = 1.0 memory = 8192k oem name [0xc88a7] = "S3 Incorporated. M7 BIOS" vendor name [0xc815d] = "S3 Incorporated." product name [0xc816e] = "VBE 2.0" product revision [0xc8176] = "Rev 1.1" 48 video modes: 0x0100[9b]: 640x400+640, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0101[9b]: 640x480+640, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0102[1b]: 800x600+100, 4 bpp, a0000.7/a0000.0: 64k 0x0103[9b]: 800x600+800, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0104[1b]: 1024x768+128, 4 bpp, a0000.7/a0000.0: 64k 0x0105[9b]: 1024x768+1024, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0106[1b]: 1280x1024+160, 4 bpp, a0000.7/a0000.0: 64k 0x0107[9b]: 1280x1024+1280, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x010e[9b]: 320x200+640, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x010f[9b]: 320x200+1280, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0111[9b]: 640x480+1280, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0112[9b]: 640x480+2560, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0114[9b]: 800x600+1600, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0115[9b]: 800x600+3200, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0117[9b]: 1024x768+2048, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0118[9b]: 1024x768+4096, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x011a[9b]: 1280x1024+2560, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x011b[9b]: 1280x1024+5120, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x011d[9b]: 640x400+1280, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x011e[9b]: 640x400+2560, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0120[9b]: 1600x1200+1600, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0122[9b]: 1600x1200+3200, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0124[9b]: 1600x1200+6400, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x012a[9b]: 640x480+1920, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x012b[9b]: 800x600+2400, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x012c[9b]: 1024x768+3072, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x012d[9b]: 1280x1024+3840, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x012e[9b]: 320x200+320, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0131[9b]: 320x240+320, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0133[9b]: 320x240+640, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0134[9b]: 320x240+1280, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0141[9b]: 400x300+400, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0143[9b]: 400x300+800, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0144[9b]: 400x300+1600, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0151[9b]: 512x384+512, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0153[9b]: 512x384+1024, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0154[9b]: 512x384+2048, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0171[9b]: 720x480+720, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0173[9b]: 720x480+1440, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0174[9b]: 720x480+2160, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0175[9b]: 720x480+2880, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0176[9b]: 720x576+720, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0178[9b]: 720x576+1440, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0179[9b]: 720x576+2160, 24 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x017a[9b]: 720x576+2880, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0200[9b]: 1024x600+1024, 8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0201[9b]: 1024x600+2048, 16 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k 0x0203[9b]: 1024x600+4096, 24+8 bpp, fb: 0xf0000000, a0000.7/a0000.0: 64k >> bios.4.3: ddc info Error (0x4f15): 0x5f15 >> misc.9: kernel log ----- kernel log ----- <4>Linux version 2.4.7-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Jul 25 18:41:33 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable) <4> BIOS-e820: 0000000007fe0000 - 0000000007ff0000 (ACPI data) <4> BIOS-e820: 0000000007ff0000 - 0000000008000000 (reserved) <4> BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved) <4> BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS) <4> BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c009fc00 for 4096 bytes. <4>On node 0 totalpages: 32736 <4>zone(0): 4096 pages. <4>zone(1): 28640 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01221000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 500.024 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 996.14 BogoMIPS <4>Memory: 125236k/130944k available (1243k kernel code, 5320k reserved, 945k data, 116k init, 0k highmem) <4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <7>CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: Common caps: 0383f9ff 00000000 00000000 00000000 <4>CPU: Intel Pentium III (Coppermine) stepping 03 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>Scanning bus 00 <4>Found 00:00 [8086/7194] 000600 00 <4>Found 00:01 [8086/7195] 000401 00 <4>Found 00:10 [11c1/0441] 000780 00 <4>Found 00:20 [5333/8c12] 000300 00 <4>Found 00:30 [1179/061b] 000604 01 <4>Found 00:38 [8086/7198] 000680 00 <4>Found 00:39 [8086/7199] 000101 00 <4>Found 00:3a [8086/719a] 000c03 00 <4>Found 00:3b [8086/719b] 000680 00 <4>Found 00:48 [1179/0d01] 000d00 00 <4>Found 00:58 [1179/0617] 000607 02 <4>Found 00:59 [1179/0617] 000607 02 <4>Fixups for bus 00 <4>Scanning behind PCI bridge 00:06.0, config 130100, pass 0 <4>Scanning bus 01 <4>Found 01:20 [8086/1229] 000200 00 <4>Fixups for bus 01 <3>Unknown bridge resource 2: assuming transparent <4>Bus scan for 01 returning with max=01 <4>Scanning behind PCI bridge 00:0b.0, config 141400, pass 0 <4>Scanning behind PCI bridge 00:0b.1, config 151500, pass 0 <4>Scanning behind PCI bridge 00:06.0, config 130100, pass 1 <4>Scanning behind PCI bridge 00:0b.0, config 141400, pass 1 <4>Scanning behind PCI bridge 00:0b.1, config 151500, pass 1 <4>Bus scan for 00 returning with max=15 <6>PCI: Using IRQ router PIIX [8086/7198] at 00:07.0 <6>PCI: Found IRQ 11 for device 00:0b.0 <6>PCI: Found IRQ 11 for device 00:0b.1 <6>PCI: Sharing IRQ 11 with 00:00.1 <3> got res[10000000:10000fff] for resource 0 of PCI device 1179:0617 <3> got res[10001000:10001fff] for resource 0 of PCI device 1179:0617 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14) <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>vesafb: framebuffer at 0xf0000000, mapped to 0xc8800000, size 8192k <6>vesafb: mode is 1024x768x8, linelength=1024, pages=9 <6>vesafb: protected mode interface info at c000:8751 <6>vesafb: scrolling: redraw <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>Real Time Clock Driver v1.10d <4>block: queued sectors max/low 83018kB/27672kB, 256 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: chipset revision 0 <4>PIIX4: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xbff0-0xbff7, BIOS settings: hda:DMA, hdb:pio <4>hda: TOSHIBA MK6015MAP, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: 11733120 sectors (6007 MB), CHS=730/255/63, UDMA(33) <6>Partition check: <6> hda: hda1 hda2 hda3 <6>Floppy drive(s): fd0 is 1.44M <4>floppy0: no floppy controllers found <4>task queue still active <6>loop: loaded (max 8 devices) <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 8192 bind 8192) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing...................................done. <4>Freeing initrd memory: 507k freed <4>VFS: Mounted root (ext2 filesystem). <4>fatfs: bogus logical sector size 5376 <4>fatfs: bogus logical sector size 5376 <4>reiserfs: checking transaction log (device 03:02) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 116k freed <6>Adding Swap: 257000k swap-space (priority -1) <6>loop: registered Twofish encryption <4>reiserfs: checking transaction log (device 07:00) ... <4>Warning, log replay starting on readonly filesystem <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 07:00) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable) <4> BIOS-e820: 0000000007fe0000 - 0000000007ff0000 (ACPI data) <4> BIOS-e820: 0000000007ff0000 - 0000000008000000 (reserved) <4> BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved) <4> BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS) <4> BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c009fc00 for 4096 bytes. <4>On node 0 totalpages: 32736 <4>zone(0): 4096 pages. <4>zone(1): 28640 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01221000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 500.024 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 996.14 BogoMIPS <4>Memory: 125236k/130944k available (1243k kernel code, 5320k reserved, 945k data, 116k init, 0k highmem) <4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <7>CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: Common caps: 0383f9ff 00000000 00000000 00000000 <4>CPU: Intel Pentium III (Coppermine) stepping 03 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>Scanning bus 00 <4>Found 00:00 [8086/7194] 000600 00 <4>Found 00:01 [8086/7195] 000401 00 <4>Found 00:10 [11c1/0441] 000780 00 <4>Found 00:20 [5333/8c12] 000300 00 <4>Found 00:30 [1179/061b] 000604 01 <4>Found 00:38 [8086/7198] 000680 00 <4>Found 00:39 [8086/7199] 000101 00 <4>Found 00:3a [8086/719a] 000c03 00 <4>Found 00:3b [8086/719b] 000680 00 <4>Found 00:48 [1179/0d01] 000d00 00 <4>Found 00:58 [1179/0617] 000607 02 <4>Found 00:59 [1179/0617] 000607 02 <4>Fixups for bus 00 <4>Scanning behind PCI bridge 00:06.0, config 130100, pass 0 <4>Scanning bus 01 <4>Found 01:20 [8086/1229] 000200 00 <4>Fixups for bus 01 <3>Unknown bridge resource 2: assuming transparent <4>Bus scan for 01 returning with max=01 <4>Scanning behind PCI bridge 00:0b.0, config 141400, pass 0 <4>Scanning behind PCI bridge 00:0b.1, config 151500, pass 0 <4>Scanning behind PCI bridge 00:06.0, config 130100, pass 1 <4>Scanning behind PCI bridge 00:0b.0, config 141400, pass 1 <4>Scanning behind PCI bridge 00:0b.1, config 151500, pass 1 <4>Bus scan for 00 returning with max=15 <6>PCI: Using IRQ router PIIX [8086/7198] at 00:07.0 <6>PCI: Found IRQ 11 for device 00:0b.0 <6>PCI: Found IRQ 11 for device 00:0b.1 <6>PCI: Sharing IRQ 11 with 00:00.1 <3> got res[10000000:10000fff] for resource 0 of PCI device 1179:0617 <3> got res[10001000:10001fff] for resource 0 of PCI device 1179:0617 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14) <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>vesafb: framebuffer at 0xf0000000, mapped to 0xc8800000, size 8192k <6>vesafb: mode is 1024x768x8, linelength=1024, pages=9 <6>vesafb: protected mode interface info at c000:8751 <6>vesafb: scrolling: redraw <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>Real Time Clock Driver v1.10d <4>block: queued sectors max/low 83018kB/27672kB, 256 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: chipset revision 0 <4>PIIX4: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xbff0-0xbff7, BIOS settings: hda:DMA, hdb:pio <4>hda: TOSHIBA MK6015MAP, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: 11733120 sectors (6007 MB), CHS=730/255/63, UDMA(33) <6>Partition check: <6> hda: hda1 hda2 hda3 <6>Floppy drive(s): fd0 is 1.44M <4>floppy0: no floppy controllers found <4>task queue still active <6>loop: loaded (max 8 devices) <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 8192 bind 8192) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing...................................done. <4>Freeing initrd memory: 507k freed <4>VFS: Mounted root (ext2 filesystem). <4>fatfs: bogus logical sector size 5376 <4>fatfs: bogus logical sector size 5376 <4>reiserfs: checking transaction log (device 03:02) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 116k freed <6>Adding Swap: 257000k swap-space (priority -1) <6>loop: registered Twofish encryption <4>reiserfs: checking transaction log (device 07:00) ... <4>Warning, log replay starting on readonly filesystem <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 07:00) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>ip_conntrack (1023 buckets, 8184 max) <5>Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.6.13 <5>Copyright (c) 2001 Intel Corporation <5> <5>eth0: Intel(R) 8255x-based Ethernet Adapter <5> Mem:0xefeff000 IRQ:11 Speed:100 Mbps Dx:Full <5> Hardware receive checksums enabled <5> ucode was not loaded <4>spurious 8259A interrupt: IRQ7. <6>IPv6 v0.8 for NET4.0 <6>IPv6 over IPv4 tunneling driver <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>usb-uhci.c: $Revision: 1.259 $ time 19:18:11 Jul 25 2001 <6>usb-uhci.c: High bandwidth mode enabled <6>PCI: Found IRQ 11 for device 00:07.2 <6>PCI: Sharing IRQ 11 with 00:02.0 <6>usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11 <4>usb-uhci.c: Detected 2 ports <6>usb.c: new USB bus registered, assigned bus number 1 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb-uhci.c: v1.251:USB Universal Host Controller Interface driver <6>usb.c: registered new driver hid <6>hid.c: v1.16:USB HID support drivers <6>mice: PS/2 mouse device common for all mice <6>PCI: Found IRQ 11 for device 00:00.1 <6>PCI: Sharing IRQ 11 with 00:0b.1 <4>PCI: Setting latency timer of device 00:00.1 to 64 <6>Non-volatile memory driver v1.1 ----- kernel log end ----- >> misc.1: misc data >> misc.1.1: open serial >> misc.1.2: open parallel ----- exec: "/sbin/insmod parport " ----- Using /lib/modules/2.4.7-4GB/kernel/drivers/parport/parport.o ----- return code: ? ----- ----- exec: "/sbin/insmod parport_pc io=0x378 irq=none,none,none" ----- Using /lib/modules/2.4.7-4GB/kernel/drivers/parport/parport_pc.o ----- return code: ? ----- >> misc.1.3: read floppy read_block0: open(/dev/fd0) failed >> misc.2.1: io >> misc.2.2: dma >> misc.2.3: irq ----- /proc/ioports ----- 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : PCI device 11c1:0441 0378-037a : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0778-077a : parport0 0cf8-0cff : PCI conf1 1c00-1cff : PCI device 11c1:0441 bf60-bf7f : PCI device 1179:0d01 bf80-bf9f : PCI device 8086:719a bf80-bf9f : usb-uhci bff0-bfff : PCI device 8086:7199 bff0-bff7 : ide0 c000-cfff : PCI Bus #01 cf40-cf7f : PCI device 8086:1229 cf40-cf5f : e100 fcc0-fcff : PCI device 8086:7195 fcc0-fcff : Intel ICH - Controller fd00-fdff : PCI device 8086:7195 fd00-fdff : Intel ICH - AC'97 ----- /proc/ioports end ----- ----- /proc/interrupts ----- 0: 728765 XT-PIC timer 1: 5781 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 24 XT-PIC serial 8: 2 XT-PIC rtc 11: 657526 XT-PIC e100, usb-uhci, Intel ICH 12: 127787 XT-PIC PS/2 Mouse 14: 44265 XT-PIC ide0 NMI: 0 ERR: 3 MIS: 0 ----- /proc/interrupts end ----- ----- /proc/dma ----- 4: cascade ----- /proc/dma end ----- >> misc.3: FPU >> misc.3.1: DMA >> misc.3.2: PIC >> misc.3.3: timer >> misc.3.4: RTC >> cpu.1: cpuinfo ----- /proc/cpuinfo ----- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 3 cpu MHz : 500.024 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 996.14 ----- /proc/cpuinfo end ----- >> memory.1: main memory size kcore mem: 0x7fe0000 klog mem 0: 0x7a4d000 klog mem 1: 0x0 klog mem: 0x7a4d000 meminfo: 0x7ae9000 >> pci.1: get pci data >> pci.2.1: raw data >> pci.3.1: address ranges >> pci.2.2: raw data >> pci.3.2: address ranges >> pci.2.3: raw data >> pci.3.3: address ranges >> pci.2.4: raw data >> pci.3.4: address ranges >> pci.2.5: raw data >> pci.2.6: raw data >> pci.3.6: address ranges >> pci.2.7: raw data >> pci.3.7: address ranges >> pci.2.8: raw data >> pci.3.8: address ranges >> pci.2.9: raw data >> pci.3.9: address ranges >> pci.2.10: raw data >> pci.3.10: address ranges >> pci.2.11: raw data >> pci.2.12: raw data >> pci.2.13: raw data >> pci.3.13: address ranges ---------- PCI raw data ---------- bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:7194:1179:0001:01 class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 94 71 06 00 00 32 01 00 00 06 00 40 80 00 "...q...2.....@.." 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00 "............y..." 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" bus 00, slot 00, func 1, vend:dev:s_vend:s_dev:rev 8086:7195:1179:0001:00 class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 11 addr0 0000fd01, size 00000000 addr1 0000fcc1, size 00000000 00: 86 80 95 71 05 00 00 00 00 00 01 04 00 00 00 00 "...q............" 10: 01 fd 00 00 c1 fc 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00 "............y..." 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 "................" bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 11c1:0441:1179:0002:01 class 07, sub_class 80 prog_if 00, hdr 0, flags , irq 11 addr0 ffefff00, size 00000000 addr1 000002f9, size 00000000 addr2 00001c01, size 00000000 00: c1 11 41 04 07 00 90 02 01 00 80 07 00 00 00 00 "..A............." 10: 00 ff ef ff f9 02 00 00 01 1c 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 40 00 00 00 79 11 02 00 "........@...y..." 30: 00 00 00 00 f8 00 00 00 00 00 00 00 0b 01 fc 0e "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" f0: 00 00 00 00 00 00 00 00 01 00 ".........." bus 00, slot 04, func 0, vend:dev:s_vend:s_dev:rev 5333:8c12:1179:0001:11 class 03, sub_class 00 prog_if 00, hdr 0, flags , irq 11 addr0 f0000000, size 00000000 rom 000c0000 00: 33 53 12 8c 07 00 10 02 11 00 00 03 08 f8 00 00 "3S.............." 10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00 "............y..." 30: 00 00 0c 00 dc 00 00 00 00 00 00 00 0b 01 04 ff "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 ".............." bus 00->01, slot 06, func 0, vend:dev:s_vend:s_dev:rev 1179:061b:0000:0000:03 class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0 00: 79 11 1b 06 07 00 d0 02 03 01 04 06 00 40 01 00 "y............@.." 10: 00 00 00 00 00 00 00 00 00 01 13 40 c0 c0 c0 22 "...........@..."" 20: d0 ef e0 ef f0 ff 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00 "................" bus 00, slot 07, func 0, vend:dev:s_vend:s_dev:rev 8086:7198:0000:0000:01 class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 98 71 0f 00 80 02 01 00 80 06 00 00 80 00 "...q............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" bus 00, slot 07, func 1, vend:dev:s_vend:s_dev:rev 8086:7199:0000:0000:00 class 01, sub_class 01 prog_if 80, hdr 0, flags <>, irq 0 addr4 0000bff1, size 00000000 00: 86 80 99 71 05 00 80 02 00 80 01 01 00 40 00 00 "...q.........@.." 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: f1 bf 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" bus 00, slot 07, func 2, vend:dev:s_vend:s_dev:rev 8086:719a:0000:0000:00 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 11 addr4 0000bf81, size 00000000 00: 86 80 9a 71 05 00 80 02 00 00 03 0c 00 40 00 00 "...q.........@.." 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 81 bf 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 "................" bus 00, slot 07, func 3, vend:dev:s_vend:s_dev:rev 8086:719b:0000:0000:00 class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 9b 71 01 00 80 02 00 00 80 06 00 00 00 00 "...q............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" bus 00, slot 09, func 0, vend:dev:s_vend:s_dev:rev 1179:0d01:1179:0001:00 class 0d, sub_class 00 prog_if 00, hdr 0, flags , irq 11 addr0 0000bf61, size 00000000 00: 79 11 01 0d 05 00 10 04 00 00 00 0d 00 40 00 00 "y............@.." 10: 61 bf 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "a..............." 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00 "............y..." 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 01 00 ".." bus 00->14, slot 0b, func 0, vend:dev:s_vend:s_dev:rev 1179:0617:0000:0000:20 class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11 addr0 10000000, size 00000000 00: 79 11 17 06 07 00 90 04 20 00 07 06 00 40 82 00 "y....... ....@.." 10: 00 00 00 10 80 00 80 04 00 14 14 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00 "................" bus 00->15, slot 0b, func 1, vend:dev:s_vend:s_dev:rev 1179:0617:0000:0000:20 class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11 addr0 10001000, size 00000000 00: 79 11 17 06 07 00 90 04 20 00 07 06 00 40 82 00 "y....... ....@.." 10: 00 10 00 10 80 00 80 04 00 15 15 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 02 00 00 "................" bus 01, slot 04, func 0, vend:dev:s_vend:s_dev:rev 8086:1229:1179:0003:08 class 02, sub_class 00 prog_if 00, hdr 0, flags , irq 11 addr0 efeff000, size 00000000 addr1 0000cf41, size 00000000 addr2 efd00000, size 00000000 00: 86 80 29 12 07 00 90 02 08 00 00 02 08 40 00 00 "..)..........@.." 10: 00 f0 ef ef 41 cf 00 00 00 00 d0 ef 00 00 00 00 "....A..........." 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 03 00 "............y..." 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38 "...............8" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 ".............." ---------- PCI raw data end ---------- >> pci.4: build list >> sys.1: cpu vmware check: 0 >> monitor.1: ddc >> isapnp.1: read port >> isapnp.2: get pnp data pnpdump: real-time scheduling (2.50) >> pnpdump.1: resources >> pnpdump.2.1: port 0x20b >> pnpdump.2.2: port 0x213 >> pnpdump.2.3: port 0x21b >> pnpdump.2.4: port 0x223 >> pnpdump.2.5: port 0x22b >> pnpdump.2.6: port 0x233 >> pnpdump.2.7: port 0x23b >> pnpdump.2.8: port 0x243 >> pnpdump.2.9: port 0x24b >> pnpdump.2.10: port 0x253 >> pnpdump.2.11: port 0x25b >> pnpdump.2.12: port 0x263 >> pnpdump.2.13: port 0x26b >> pnpdump.2.14: port 0x273 >> pnpdump.2.15: port 0x27b >> pnpdump.2.16: port 0x283 >> pnpdump.2.17: port 0x28b >> pnpdump.2.18: port 0x293 >> pnpdump.2.19: port 0x29b >> pnpdump.2.20: port 0x2a3 pnpdump: normal scheduling (0.0) ---------- ISA PnP raw data ---------- isapnp read port: 0x0 ---------- ISA PnP raw data end ---------- >> isapnp.4: build list >> isa.1: isdn ---------- ISA ISDN raw data ---------- ---------- ISA ISDN raw data end ---------- >> isa.1.1: isdn >> serial.1: read info ----- /proc/tty/driver/serial ----- 0: uart:16550A port:3F8 irq:4 baud:2400 tx:89 rx:0 1: uart:unknown port:2F8 irq:3 2: uart:unknown port:3E8 irq:4 3: uart:unknown port:2E8 irq:3 4: uart:unknown port:1A0 irq:9 5: uart:unknown port:1A8 irq:9 6: uart:unknown port:1B0 irq:9 7: uart:unknown port:1B8 irq:9 8: uart:unknown port:2A0 irq:5 9: uart:unknown port:2A8 irq:5 10: uart:unknown port:2B0 irq:5 11: uart:unknown port:2B8 irq:5 12: uart:unknown port:330 irq:4 13: uart:unknown port:338 irq:4 14: uart:unknown port:0 irq:0 15: uart:unknown port:0 irq:0 ----- /proc/tty/driver/serial end ----- ----- serial info ----- uart 16550A, line 0, port 0x3f8, irq 4, baud 2400 ----- serial info end ----- >> serial.2: build list >> misc.5: misc data ----- misc resources ----- i/o:1 0x0000 - 0x001f (0x20) "dma1" i/o:1 0x0020 - 0x003f (0x20) "pic1" i/o:1 0x0040 - 0x005f (0x20) "timer" i/o:1 0x0060 - 0x006f (0x10) "keyboard" i/o:1 0x0070 - 0x007f (0x10) "rtc" i/o:1 0x0080 - 0x008f (0x10) "dma page reg" i/o:1 0x00a0 - 0x00bf (0x20) "pic2" i/o:1 0x00c0 - 0x00df (0x20) "dma2" i/o:1 0x00f0 - 0x00ff (0x10) "fpu" i/o:1 0x01f0 - 0x01f7 (0x08) "ide0" i/o:0 0x02f8 - 0x02ff (0x08) "PCI device 11c1:0441" i/o:1 0x0378 - 0x037a (0x03) "parport0" i/o:1 0x03c0 - 0x03df (0x20) "vesafb" i/o:1 0x03f6 - 0x03f6 (0x01) "ide0" i/o:1 0x03f8 - 0x03ff (0x08) "serial(auto)" i/o:1 0x0778 - 0x077a (0x03) "parport0" i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1" i/o:0 0x1c00 - 0x1cff (0x100) "PCI device 11c1:0441" i/o:0 0xbf60 - 0xbf7f (0x20) "PCI device 1179:0d01" i/o:0 0xbf80 - 0xbf9f (0x20) "PCI device 8086:719a" i/o:0 0xbf80 - 0xbf9f (0x20) "usb-uhci" i/o:0 0xbff0 - 0xbfff (0x10) "PCI device 8086:7199" i/o:1 0xbff0 - 0xbff7 (0x08) "ide0" i/o:0 0xc000 - 0xcfff (0x1000) "PCI Bus #01" i/o:0 0xcf40 - 0xcf7f (0x40) "PCI device 8086:1229" i/o:0 0xcf40 - 0xcf5f (0x20) "e100" i/o:0 0xfcc0 - 0xfcff (0x40) "PCI device 8086:7195" i/o:0 0xfcc0 - 0xfcff (0x40) "Intel ICH - Controller" i/o:0 0xfd00 - 0xfdff (0x100) "PCI device 8086:7195" i/o:0 0xfd00 - 0xfdff (0x100) "Intel ICH - AC'97" irq:1 0 ( 728765) "timer" irq:1 1 ( 5781) "keyboard" irq:1 2 ( 0) "cascade" irq:1 4 ( 24) "serial" irq:1 8 ( 2) "rtc" irq:0 11 ( 657526) "e100" "usb-uhci" "Intel ICH" irq:1 12 ( 127787) "PS/2 Mouse" irq:1 14 ( 44265) "ide0" dma:1 4 "cascade" ----- misc resources end ----- >> parallel.1: pp mod ----- exec: "/sbin/rmmod lp" ----- ----- return code: ? ----- ----- exec: "/sbin/rmmod parport_pc" ----- ----- return code: ? ----- ----- exec: "/sbin/modprobe parport_pc" ----- ----- return code: ? ----- >> parallel.2.1: lp read info >> parallel.2.2: lp read info >> parallel.2.3: lp read info ----- parallel info ----- /proc/sys/dev/parport/parport0/base-addr 888 1912 /proc/sys/dev/parport/parport0/autoprobe ----- parallel info end ----- >> parallel.5: imm mod ----- exec: "/sbin/insmod imm " ----- Using /lib/modules/2.4.7-4GB/kernel/drivers/scsi/imm.o /lib/modules/2.4.7-4GB/kernel/drivers/scsi/imm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters ----- return code: ? ----- >> parallel.5: ppa mod ----- exec: "/sbin/insmod ppa " ----- Using /lib/modules/2.4.7-4GB/kernel/drivers/scsi/ppa.o /lib/modules/2.4.7-4GB/kernel/drivers/scsi/ppa.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters ----- return code: ? ----- >> ide.1.1: read info >> ide.1.2: read info >> ide.1.3: read info >> ide.1.4: read info >> ide.1.5: read info >> ide.1.6: read info >> ide.1.7: read info >> ide.1.8: read info >> ide.1.9: read info >> ide.1.10: read info >> ide.1.11: read info >> ide.1.12: read info >> ide.1.13: read info >> ide.1.14: read info >> ide.1.15: read info >> ide.1.16: read info >> scsi.1: read info >> scsi.1.1: proc >> dac960.1.1: read info >> dac960.1.2: read info >> dac960.1.3: read info >> dac960.1.4: read info >> dac960.1.5: read info >> dac960.1.6: read info >> dac960.1.7: read info >> dac960.1.8: read info >> i2o.1: read info >> cciss.1: read info >> usb.1: check >> usb.3: read info ----- /proc/bus/usb/devices ----- T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=bf80 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms ----- /proc/bus/usb/devices end ----- ----- usb device info ----- 1:1 (@1:0) 2 1500000 vend 0x0000, dev 0x0000, rev 0x0000 cls/sub/prot: 0x09/0x00/0x00 0x09/0x00/0x00 driver "hub" product "USB UHCI Root Hub" serial "bf80" ----- usb device info end ----- >> usb.4: build list >> usb.5: tree >> kbd.1: get info >> braille.1.1: alva >> braille.2.1: alva open >> braille.3.1: alva init ok >> braille.4.1: alva read data alva.100@/dev/ttyS0[0]: >> braille.5.1: alva read done >> braille.1.1: fhp_old >> braille.2.1: fhp open >> braille.3.1: fhp init ok >> braille.4.1: fhp write ok >> braille.5.1: fhp read done fhp@/dev/ttyS0[0]: no fhp display: 0x00 >> braille.1.1: fhp_el >> braille.2.1: fhp open >> braille.3.1: fhp init ok >> braille.4.1: fhp write ok >> braille.5.1: fhp read done fhp@/dev/ttyS0[0]: no fhp display: 0x00 >> braille.1.1: ht >> braille.2.1: ht open >> braille.3.1: ht init ok >> braille.4.1: ht write ok >> braille.5.1: ht read done ht@/dev/ttyS0[1]: 00 "." no ht display: 0x00 >> braille.1.1: baum >> braille.2.1: baum open >> braille.3.1: baum write ok >> braille.4.1: baum read done baum@/dev/ttyS0[0]: >> modem.1: serial >> modem.2: init >> modem.3.1: at test >> modem.9.1: write at cmd >> modem.9.1: read at resp >> modem.9.1: read ok /dev/ttyS0@115200: AT "" >> modem.3.2: at test >> modem.9.2: write at cmd >> modem.9.2: read at resp >> modem.9.2: read ok /dev/ttyS0@38400: AT "" >> modem.3.3: at test >> modem.9.3: write at cmd >> modem.9.3: read at resp >> modem.9.3: read ok /dev/ttyS0@9600: AT "" >> modem.3.4: at test >> modem.9.4: write at cmd >> modem.9.4: read at resp >> modem.9.4: read ok /dev/ttyS0@1200: AT "" >> modem.4: init string >> modem.5: speed >> modem.8: testing >> modem.5: pnp id ----- serial modems ----- /dev/ttyS0 not a modem ----- serial modems end ----- >> mouse.1: ps/2 >> mouse.1.1: ps/2 >> mouse.1.2: ps/2 >> mouse.1.3: ps/2 ps/2[0]: "" >> mouse.1.4: ps/2 ps/2[0]: "" >> mouse.1.5: ps/2 ps/2[0]: "" >> mouse.1.6: ps/2 >> mouse.1.7: ps/2 >> mouse.1.8: ps/2 >> mouse.1.11: ps/2 >> mouse.1.12: ps/2 >> mouse.1.13: ps/2 >> mouse.1.14: ps/2 >> mouse.2: serial ----- serial mice ----- /dev/ttyS0 ----- serial mice end ----- >> mouse.3: sunmouse >> fb.1: read info >> cdrom.1: get devices ----- /proc/sys/dev/cdrom/info ----- drive name: drive speed: drive # of slots: Can close tray: Can open tray: Can lock tray: Can change speed: Can select disk: Can read multisession: Can read MCN: Reports media changed: Can play audio: Can write CD-R: Can write CD-RW: Can read DVD: Can write DVD-R: Can write DVD-RAM: ----- /proc/sys/dev/cdrom/info end ----- >> cdrom.2: build list >> net.1: get net-if data ----- network interfaces ----- lo eth0 sit0 ----- network interfaces end ----- >> net.2: build list >> isdn.1: list >> int.1: idescsi >> int.2: pcmcia >> int.3: cdrom >> int.4: media >> int.4.1: /dev/hda read_block0: 512 bytes (5s, 0us) >> int.5: bios >> int.6: floppy ----- /proc/modules ----- parport_pc 19376 0 parport 23264 0 [parport_pc] nvram 4000 0 (autoclean) snd-mixer-oss 4928 0 (autoclean) autofs 10304 3 (autoclean) snd-card-intel8x0 8960 2 snd-pcm 30272 2 [snd-card-intel8x0] snd-timer 8464 0 [snd-pcm] snd-ac97-codec 23616 0 [snd-card-intel8x0] snd-mixer 23872 0 [snd-mixer-oss snd-ac97-codec] snd 33488 5 [snd-mixer-oss snd-card-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mixer] soundcore 3760 1 [snd] mousedev 4160 0 (unused) hid 11952 0 (unused) input 3296 0 [mousedev hid] usb-uhci 20736 0 (unused) usbcore 47872 1 [hid usb-uhci] ipv6 132784 -1 (autoclean) af_packet 12064 1 (autoclean) e100 48048 1 (autoclean) ipchains 34592 0 (unused) loop_fish2 9280 1 reiserfs 154992 2 ----- /proc/modules end ----- used irqs: 0,1,2,4,8,11,12,14 =========== end debug info ============ 01: None 00.0: 0102 Floppy disk controller [Created at floppy.80] Unique ID: rdCR.3wRL2_g4d2B Hardware Class: storage Model: "Floppy disk controller" Config Status: cfg=new, avail=yes, crit=no 02: Floppy 00.0: 10603 Floppy Disk [Created at floppy.87] Unique ID: sPPV.oZ89vuho4Y3 Hardware Class: floppy Model: "Floppy Disk" Device File: /dev/fd0 Size: 3.5 '' Size: 2880 sectors a 512 bytes Drive status: no medium Config Status: cfg=new, avail=yes, crit=no Attached to: #1 (Floppy disk controller) 03: None 00.0: 10105 BIOS [Created at bios.80] Unique ID: rdCR.lZF+r4EgHp4 Serial Port 0: 0x3f8 Parallel Port 0: 0x378 Base Memory: 639k PnP BIOS: TOS3400 Config Status: cfg=new, avail=yes, crit=no 04: None 00.0: 11001 VESA Framebuffer [Created at bios.258] Unique ID: rdCR.T0uJMm5AF43 Hardware Class: framebuffer Model: "S3 Incorporated. M7 BIOS VBE 2.0" Vendor: "S3 Incorporated." Device: "VBE 2.0" SubVendor: "S3 Incorporated. M7 BIOS" SubDevice: 0000 "?" Revision: "Rev 1.1" Memory Size: 8M Memory Range: 0xf0000000-0xf07fffff (rw) Mode 0x0300: 640x400 (+640), 8 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+800), 8 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0307: 1280x1024 (+1280), 8 bits Mode 0x030e: 320x200 (+640), 16 bits Mode 0x030f: 320x200 (+1280), 24 bits Mode 0x0311: 640x480 (+1280), 16 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x031a: 1280x1024 (+2560), 16 bits Mode 0x031b: 1280x1024 (+5120), 24 bits Mode 0x031d: 640x400 (+1280), 16 bits Mode 0x031e: 640x400 (+2560), 24 bits Mode 0x0320: 1600x1200 (+1600), 8 bits Mode 0x0322: 1600x1200 (+3200), 16 bits Mode 0x0324: 1600x1200 (+6400), 24 bits Mode 0x032a: 640x480 (+1920), 24 bits Mode 0x032b: 800x600 (+2400), 24 bits Mode 0x032c: 1024x768 (+3072), 24 bits Mode 0x032d: 1280x1024 (+3840), 24 bits Mode 0x032e: 320x200 (+320), 8 bits Mode 0x0331: 320x240 (+320), 8 bits Mode 0x0333: 320x240 (+640), 16 bits Mode 0x0334: 320x240 (+1280), 24 bits Mode 0x0341: 400x300 (+400), 8 bits Mode 0x0343: 400x300 (+800), 16 bits Mode 0x0344: 400x300 (+1600), 24 bits Mode 0x0351: 512x384 (+512), 8 bits Mode 0x0353: 512x384 (+1024), 16 bits Mode 0x0354: 512x384 (+2048), 24 bits Mode 0x0371: 720x480 (+720), 8 bits Mode 0x0373: 720x480 (+1440), 16 bits Mode 0x0374: 720x480 (+2160), 24 bits Mode 0x0375: 720x480 (+2880), 24 bits Mode 0x0376: 720x576 (+720), 8 bits Mode 0x0378: 720x576 (+1440), 16 bits Mode 0x0379: 720x576 (+2160), 24 bits Mode 0x037a: 720x576 (+2880), 24 bits Mode 0x0400: 1024x600 (+1024), 8 bits Mode 0x0401: 1024x600 (+2048), 16 bits Mode 0x0403: 1024x600 (+4096), 24 bits Config Status: cfg=new, avail=yes, crit=no 05: None 00.0: 10104 FPU [Created at misc.193] Unique ID: rdCR.EMpH5pjcahD Model: "FPU" I/O Ports: 0xf0-0xff (rw) Config Status: cfg=new, avail=yes, crit=no 06: None 00.0: 0801 DMA controller (8237) [Created at misc.207] Unique ID: rdCR.f5u1ucRm+H9 Model: "DMA controller" I/O Ports: 0x00-0x1f (rw) I/O Ports: 0xc0-0xdf (rw) I/O Ports: 0x80-0x8f (rw) DMA: 4 Config Status: cfg=new, avail=yes, crit=no 07: None 00.0: 0800 PIC (8259) [Created at misc.220] Unique ID: rdCR.8uRK7LxiIA2 Model: "PIC" I/O Ports: 0x20-0x3f (rw) I/O Ports: 0xa0-0xbf (rw) IRQ: 2 (no events) Config Status: cfg=new, avail=yes, crit=no 08: None 00.0: 0802 Timer (8254) [Created at misc.231] Unique ID: rdCR.AJKleuxpiP0 Model: "Timer" I/O Ports: 0x40-0x5f (rw) IRQ: 0 (728765 events) Config Status: cfg=new, avail=yes, crit=no 09: None 00.0: 0803 RTC (Generic) [Created at misc.242] Unique ID: rdCR.hWmSPAStPX7 Model: "RTC" I/O Ports: 0x70-0x7f (rw) IRQ: 8 (2 events) Config Status: cfg=new, avail=yes, crit=no 10: None 00.0: 0900 Keyboard controller [Created at misc.252] Unique ID: rdCR.9N+EecqykME Model: "Keyboard controller" I/O Ports: 0x60-0x6f (rw) IRQ: 1 (5781 events) Config Status: cfg=new, avail=yes, crit=no 11: None 00.0: 0701 Parallel controller (SPP) [Created at misc.263] Unique ID: YMnp.ecK7NLYWZ5D Model: "Parallel controller" Device File: /dev/lp0 I/O Ports: 0x378-0x37a (rw) I/O Ports: 0x778-0x77a (rw) Config Status: cfg=new, avail=yes, crit=no 12: None 00.0: 10400 PS/2 Controller [Created at misc.305] Unique ID: rdCR.DziBbWO85o5 Model: "PS/2 Controller" IRQ: 12 (127787 events) Config Status: cfg=new, avail=yes, crit=no 13: None 00.0: 10103 CPU [Created at cpu.277] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: Intel Vendor: "GenuineIntel" Model: 6.8.3 "Pentium III (Coppermine)" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse Clock: 500 MHz Cache: 256 kb Config Status: cfg=new, avail=yes, crit=no 14: None 00.0: 10102 Main Memory [Created at memory.56] Unique ID: rdCR.CxwsZFjVASF Model: "Main Memory" Memory Range: 0x00000000-0x07fdffff (rw) Memory Size: 128M Config Status: cfg=new, avail=yes, crit=no 15: PCI 00.0: 0600 Host bridge [Created at pci.64] Unique ID: qLht.HrLEQg9Sg31 Model: "Toshiba America Info 82440MX I/O Controller" Vendor: 8086 "Intel Corporation" Device: 7194 "82440MX I/O Controller" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0001 "?" Revision: 0x01 Config Status: cfg=new, avail=yes, crit=no 16: PCI 00.1: 0401 Multimedia audio controller [Created at pci.64] Unique ID: hgAj.mgFn43Zjv7C Hardware Class: sound Model: "Toshiba America Info 82440MX AC'97 Audio Controller" Vendor: 8086 "Intel Corporation" Device: 7195 "82440MX AC'97 Audio Controller" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0001 "?" I/O Ports: 0xfd00-??? (rw) I/O Ports: 0xfcc0-??? (rw) IRQ: 11 (657526 events) Driver Info #0: Driver Status: i810_audio is not active Driver Activation Cmd: "modprobe i810_audio" Config Status: cfg=new, avail=yes, crit=no 17: PCI 02.0: 0780 Communication controller [Created at pci.64] Unique ID: _Znp.VM0S123FOr7 Model: "Toshiba America Info 56k WinModem" Vendor: 11c1 "Lucent Microelectronics" Device: 0441 "56k WinModem" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0002 "?" Revision: 0x01 Memory Range: 0xffefff00-??? (rw,non-prefetchable) I/O Ports: 0x2f8-??? (rw) I/O Ports: 0x1c00-??? (rw) IRQ: 11 (657526 events) Config Status: cfg=new, avail=yes, crit=no 18: PCI 04.0: 0300 VGA compatible controller (VGA) [Created at pci.64] Unique ID: 8otl.7nhiGmaJFN3 Hardware Class: graphics card Model: "Toshiba America Info S3 Savage IX8 Toshiba Notebook" Vendor: 5333 "S3 Inc." Device: 8c12 "86C270-294 Savage/MX-/IX" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0001 "S3 Savage IX8 Toshiba Notebook" Revision: 0x11 Memory Range: 0xf0000000-??? (rw,non-prefetchable) Memory Range: 0x000c0000-??? (ro,disabled) IRQ: 11 (657526 events) I/O Ports: 0x3c0-0x3df (rw) Driver Info #0: XFree86 v4 Server Module: savage Driver Info #1: XFree86 v3 Server: SVGA Config Status: cfg=new, avail=yes, crit=no 19: PCI 06.0: 0604 PCI bridge (Subtractive decode) [Created at pci.64] Unique ID: H0_h.pVyytZowkbD Model: "Toshiba America Info PCI bridge" Vendor: 1179 "Toshiba America Info Systems" Device: 061b "?" Revision: 0x03 Config Status: cfg=new, avail=yes, crit=no 20: PCI 07.0: 0680 Bridge [Created at pci.64] Unique ID: M71A.WFMeeXe8XqC Model: "Intel 82440MX PCI to ISA Bridge" Vendor: 8086 "Intel Corporation" Device: 7198 "82440MX PCI to ISA Bridge" Revision: 0x01 Config Status: cfg=new, avail=yes, crit=no 21: PCI 07.1: 0101 IDE interface [Created at pci.64] Unique ID: ESW+.ydYHU57loQ1 Hardware Class: storage Model: "Intel 82440MX EIDE Controller" Vendor: 8086 "Intel Corporation" Device: 7199 "82440MX EIDE Controller" I/O Ports: 0xbff0-0xbff7 (rw) I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) IRQ: 14 (44265 events) Config Status: cfg=new, avail=yes, crit=no 22: PCI 07.2: 0c03 USB Controller (UHCI) [Created at pci.64] Unique ID: 5n+q.gm5o+y8GUr2 Model: "Intel 82440MX USB Universal Host Controller" Vendor: 8086 "Intel Corporation" Device: 719a "82440MX USB Universal Host Controller" I/O Ports: 0xbf80-??? (rw) IRQ: 11 (657526 events) Config Status: cfg=new, avail=yes, crit=no 23: PCI 07.3: 0680 Bridge [Created at pci.64] Unique ID: y5Vg.YgpoXKZG+w9 Model: "Intel 82440MX Power Management Controller" Vendor: 8086 "Intel Corporation" Device: 719b "82440MX Power Management Controller" Config Status: cfg=new, avail=yes, crit=no 24: PCI 09.0: 0d00 IRDA controller [Created at pci.64] Unique ID: WL76.Cc+VppfE785 Model: "Toshiba America Info FIR Port Type-DO" Vendor: 1179 "Toshiba America Info Systems" Device: 0d01 "FIR Port Type-DO" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0001 "FIR Port Type-DO" I/O Ports: 0xbf60-??? (rw) IRQ: 11 (657526 events) Config Status: cfg=new, avail=yes, crit=no 25: PCI 0b.0: 0607 CardBus bridge [Created at pci.64] Unique ID: gZD2.E5xyt6owqD9 Model: "Toshiba America Info ToPIC95 PCI to Cardbus Bridge with ZV Support" Vendor: 1179 "Toshiba America Info Systems" Device: 0617 "ToPIC95 PCI to Cardbus Bridge with ZV Support" Revision: 0x20 Memory Range: 0x10000000-??? (rw,non-prefetchable) IRQ: 11 (657526 events) Config Status: cfg=new, avail=yes, crit=no 26: PCI 0b.1: 0607 CardBus bridge [Created at pci.64] Unique ID: Xuit.E5xyt6owqD9 Model: "Toshiba America Info ToPIC95 PCI to Cardbus Bridge with ZV Support" Vendor: 1179 "Toshiba America Info Systems" Device: 0617 "ToPIC95 PCI to Cardbus Bridge with ZV Support" Revision: 0x20 Memory Range: 0x10001000-??? (rw,non-prefetchable) IRQ: 11 (657526 events) Config Status: cfg=new, avail=yes, crit=no 27: PCI 104.0: 0200 Ethernet controller [Created at pci.64] Unique ID: pe4v.qzsJ_CB458A Hardware Class: network Model: "Toshiba America Info 82557 [Ethernet Pro 100]" Vendor: 8086 "Intel Corporation" Device: 1229 "82557 [Ethernet Pro 100]" SubVendor: 1179 "Toshiba America Info Systems" SubDevice: 0003 "?" Revision: 0x08 Memory Range: 0xefeff000-??? (rw,non-prefetchable) I/O Ports: 0xcf40-??? (rw) Memory Range: 0xefd00000-??? (rw,non-prefetchable) IRQ: 11 (657526 events) Driver Info #0: Driver Status: e100 is active Driver Activation Cmd: "insmod e100" Driver Info #1: Driver Status: eepro100 is not active Driver Activation Cmd: "insmod eepro100" Driver Info #2: Driver Status: eepro100-old is not active Driver Activation Cmd: "insmod eepro100-old" Config Status: cfg=new, avail=yes, crit=no Attached to: #19 (PCI bridge (Subtractive decode)) 28: None 00.0: 10107 System [Created at sys.47] Unique ID: rdCR.n_7QNeEnh23 Hardware Class: system Config Status: cfg=new, avail=yes, crit=no 29: None 00.0: 0700 Serial controller (16550) [Created at serial.69] Unique ID: S_Uw.3fyvFV+mbWD Model: "16550A" Device: "16550A" Device File: /dev/ttyS0 Speed: 2.4 kbps I/O Ports: 0x3f8-0x3ff (rw) IRQ: 4 (24 events) Config Status: cfg=new, avail=yes, crit=no 30: IDE 00.0: 10600 Disk [Created at ide.59] Unique ID: nBbg.PLctbCfdy1E Hardware Class: disk Model: "TOSHIBA MK6015MAP" Device: "TOSHIBA MK6015MAP" Revision: "U8.13 A" Serial ID: "90EA2458T" Driver: "ide-disk" Device File: /dev/hda Geometry (Physical): CHS 12416/15/63 Geometry (Logical): CHS 730/255/63 Size: 11733120 sectors a 512 bytes Config Status: cfg=new, avail=yes, crit=no 31: USB 101.0: 10a00 Hub [Created at usb.89] Unique ID: nN27.HOXS4VTbn0D Model: "USB UHCI Root Hub" Device: "USB UHCI Root Hub" Serial ID: "bf80" USB Device status: driver active ("hub") Speed: 1.5 Mbps Config Status: cfg=new, avail=yes, crit=no 32: None 00.0: 10800 Keyboard [Created at kbd.155] Unique ID: rdCR.iWbWo71vw2C Hardware Class: keyboard Model: "PC Keyboard" Vendor: s0201 "Unknown" Device: 0000 "PC Keyboard" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, crit=no Attached to: #10 (Keyboard controller) 33: PS/2 00.0: 10500 PS/2 Mouse [Created at mouse.275] Unique ID: yibb.g++hATXqKsF Hardware Class: mouse Model: "Generic PS/2 Mouse" Vendor: s0200 "Unknown" Device: 0002 "Generic PS/2 Mouse" Device File: /dev/psaux Driver Info #0: Wheels: 0 XFree86 Protocol: ps/2 GPM Protocol: ps2 Config Status: cfg=new, avail=yes, crit=no Attached to: #12 (PS/2 Controller) 34: None 00.0: 10700 Loopback [Created at net.66] Unique ID: n6T_.GQNx7L4uPNA Hardware Class: network interface Model: "Loopback network interface" Device File: lo Config Status: cfg=new, avail=yes, crit=no 35: None 00.0: 10701 Ethernet [Created at net.66] Unique ID: Phe5.ndpeucax6V1 Hardware Class: network interface Model: "Ethernet network interface" Device File: eth0 Config Status: cfg=new, avail=yes, crit=no 36: None 00.0: 10780 Network Interface [Created at net.66] Unique ID: RaT_.GSopYcFr9cF Hardware Class: network interface Model: "Network Interface" Device File: sit0 Config Status: cfg=new, avail=yes, crit=no